CNB IBP5030CR - Manual (Page 13)

Network Weatherproof Camera Installation Manual
13 / 20
3.2. Installing IP-Installer Software and Configuring IP address
3.2.1. About IP-Installer
A unique IP address is required in order to connect the network camera to the network and have a Client PC
connected to the camera remotely through the network. IP-Installer software, provided in the Installation CD
and also available to download from http://www.cnbtec.com, makes it easy to configure the IP address. If
your network uses DHCP server, the IP address will automatically be given by the network. If the network
does not have DHCP server, the default IP address is 192.168.123.100. For more details on how to install
and use IP Installer software, please refer to [Owner’s Manual for IP-Installer].
3.2.2. IP Address Configuration
1. The following window will pop up when you start the IP-installer software.
Figure 3-1. IP Installer Window