Software installation – CNB IBP5030CR User Manual
Page 12
Network Weatherproof Camera Installation Manual
12 / 20
3. Software Installation
This section provides brief guidelines on installing the XNET software and using it to monitor Video and
Audio. If you have questions about details not explained in this section or if the product is not functioning
as described, please refer to FAQ before contacting your provider.
Our homepage is
http://www.cnbtec.com.
3.1. Connecting XNET to network
1. A PC or a laptop computer is required to configure an IP address.
z
Compatible operating system: Windows 2000, Windows XP, and Windows Vista
z
Since the default IP address of the device is 192.168.123.100, change the computer’s IP address to
192.168.123.101 and Subnet Mask to 255.255.255.0
2. Connect a monitor to VIDEO OUT terminal. (Select Video Out at Menu screen to enable analog video
output.)
3. Connect the computer or a network HUB to the product’s network input. (Use a crossover cable when
connecting it directly to a PC, and use a direct cable when connecting it to a HUB)
4. Connect the camera to a power source.
5. Connect Alarm Input/ output and audio if necessary.
Crossover Network Cable
COMPUTER
Direct Network Cable
COMPUTER
NETWORK HUB