Clock Audio CW 200 User Manual
Page 7

6
Controls and functions
1. Power button. Press to power up. Press and hold for 4 seconds to power off.
2. Channel A multifunction display.
3. IR sensor window. Used to transfer frequency and settings to the transmitters.
4. Channel A < / > Use these buttons to navigate / change settings.
5. Channel A Set button. Used to change Functions and to confirm settings. Also used to quickly
show Channel or Frequency when briefly pressed.
6. Channel A Synch button. Used to send commands to a transmitter such as change of
frequency and showing frequency or channel number.
The function buttons for Receiver B are duplicated and have same operation to that shown
above for channel A receiver.
7. Channel B Synch button.
8. Channel B > buttons.
9. Channel B Set button.
10. Channel B multifunction display.