Clock Audio CW 200 - Manual (Page 14)

13
Troubleshooting Guide
No audio

Is Transmitter powered up

Check transmitter frequency shows in the receiver

Replace transmitter batteries

Is the receiver connections to external equipment correct

Is the external equipment powered up

Out of range / bring transmitter closer to the receiver

Noisy audio / poor reception /
Distorted audio

Replace transmitter batteries

Check that transmitter / receiver Frequencies are the same.
 Co channel interference / external interference try
changing transmitter frequency.

Receiver antennas close to electrical interference.
Move away from electrical items such as laptops,
digital equipment, neon lights and motors.

If using Mixed out socket try adjusting the volume
controls or the 2 step attenuator on the back of the
receiver.