KT&C KPC-ZA180NH User Manual

Page 36

Text mode
Original mode

7 . O p e r a t i n g C a m e r a

6. V END

• Set the vertical starting point for motion detection area.
• Select desired position from 6 to 128 in WINDOW0~3.
• Select desired position from 0 to 7 in BLOCK.

7. SENSITIVITY

• Increase or decrease detection sensitivity value.
• Can be set from 1 (low response) to 15 (sensitive).

8. ALARM

• Select desired alert type.
• OSD : The WINDOW or BLOCK will be displayed on the screen
when motion is detected.
• SERIAL : Alert packet is transmitted via RS-485 when motion is
detected.
• OSD&SERIAL : Use OSD and SERIAL feature simultaneously.

9. INITIAL

• Initializes the changed category in MOTION DETECT menu.
•

Press the NEAR/FAR button to confirm.

SPECIAL Sub-Menu : MOTION DETECT

3 6

3 7