Warning, Instruction manual – Ken Tool 33195 Nineteen-Five Mount_Demount Tool Set User Manual

Page 3

WARNING

Instruction Manual

Part No. Safety Warning

WARNING

If you don’t know how to use tire changing tools – STOP!

Tire changing should only be done by trained persons.

If you do it wrong, you could be hurt or killed.

Here are some Safety Rules.

For complete tire servicing procedures, read the tire

and rim makers’ service manuals. You can also get

free wall charts about tire servicing by calling

OSHA.

USING TIRE TOOLS

ALWAYS wear eye protection when using hammers and tire irons.

ALWAYS use soft-faced hammers when driving tire irons.

NEVER use one hammer to strike another hammer.

NEVER use a hammer with a loose or cracked handle.

NEVER use a dented, cracked, chipped, or mushroomed tool.

NEVER use a tire tool for anything except mounting/demounting tires.

INFLATING TIRES

NEVER add air to a tire that has been run flat or under inflated.

NEVER hammer, strike, or pry on an inflated tire and rim.

ALWAYS use an inflation cage when inflating tires.

ALWAYS use a clip-on chuck.

ALWAYS use an extension hose with a removable valve and gauge.

NEVER inflate a tire over 40 psi if the tire beads are not seated.

768 E. North Street, Akron, Ohio 44305; Phone: 888-536-8665, Fax: 330-535-1345

Website: www.kentool.com E-Mail: [email protected]

NEVER use starting fluid, ether, gasoline or other flammable liquids to lubricate or seat the beads of a
tubeless tire. A gigantic explosion can result.