Ken Tool 30165 Dual Wheel Lug Stud User Manual
Page 2
768 E. North Street, P. O. Box 9320, Akron, Ohio 44305 – (330) 535-7177; Fax: (330) 535-1345 or (800) 872-4929
www.kentool.com
Part No.: 30165-98
1
Lubricate the threads of the stripped inner cap nut. Hammer the 30165 lug stud
remover over the stripped inner cap nut threads at least ½” and as straight as possible
to avoid premature destruction of the self-tapping splines. For the longer length inner
cap nuts it’s recommended you drive the 30165 remover about ¾” over the thread. A
crooked installation can overload the individual splines and blunt or distort their cutting
edge reducing the life of the tool
2
Unscrew the stripped inner cap nut with a 1-½” socket or wrench applied to the back of
the 30165 socket. Remove the stripped cap nut from the 30165 socket by suspending
the socket over an open vise so the damaged cap nut can be hammered out of the
30165 socket with a punch or drift pin inserted through the hole in the rear of the socket.