Jungheinrich EKX_513-515 - Manual (Page 6)

RFID floor quality recognition control
(optional)
■ Truck control with transponder technology.
■ Permanent route measuring for exact
recognition of all warehouse areas.
■ High flexibility regarding switching and
safety functions (aisle end stop, lift / travel
switch- off, speed reduction).
■ Optimisation of travel speed relative to the
profile of the floor.
Infinite control of hydraulic motor
giving high efficiency
■ Low energy loss due to hydraulic tank with
heat-resistant plastic container.
■ Powerful motors.
■ Seamless operation of all functions together.
Integrated Jungheinrich personnel
protection system (PPS)
■ Optionally available, factory fitted and in-
tegrated into the trucks electronic con-
troller / CAN-Bus.
■ Projecting, commissioning and mainte-
nance carried out by Jungheinrich.
Ergonomics and comfort
■ Generously dimensioned entrance into the
cab.
■ Large foot well, adjustable knee supports.
■ Excellent visibility towards the load with low
swivelling sideshift and clear view masts.
■ Sprung, adjustable and foldable comfort seat.
■ Electrically adjustable operating console
with colour display.
■ Soft key pad (softkey) with number block.
■ Individual travel programmes.
■ Switchless two-handed operating concept.
■ Stop position/transfer cushioning of all hy-
draulic functions.
Control and CAN-Bus system
■ All functions are adjustable.
■ Electronically controlled drive wheel brake
and non-wearing electromagnetic lami-
nated brake on load wheels.
■ Electrically active stabilisers for maximum
capacities to high lift heights (optional).
Commissioning and maintenance
■ Fast and safe commissioning through teach-
in process.
■ Integrated diagnostic system for remote
maintenance via modem.
■ 1000 operating hours service interval.
■ Electronics with non-wearing sensor system.
■ The gear oil in maintenance-free and sealed
for life.
■ Revolution counter on wheels with traction
control and wear recognition on drive wheel.
Reliable operation – high availability
■ Robust and non-wearing 3-phase AC drives
without wearing parts.
■ 70% fewer cables and plugs due to CAN-Bus.
■ Extremely torsion-resistant mast for high
residual capacities and low mast sway.
Additional equipment
■ Mechanical rail guidance.
■ Inductive guidance for precise control in
the aisle with no mechanical loading of
components.
■ Modular telescopic forks in various designs.
■ Comfort package “workplace” with work-
place lighting, mirror, ventilator.
■ Radio with CD player and MP3 interface.
■ Synchronised swivelling of forks.
■ Mechanical and electric interfaces for
material flow management systems.
■ Jungheinrich ISM: information system for
stacker management.
■ Truck prepared for accepting working plat-
forms.
■ Modular system for lift and travel stop as
well as speed reduction.
■ Switches on overhead load guard.
7486.GB.0,5.10.2009.r
.s.
Make use of the advantages
Entrance Battery cover
Operating console
Jungheinrich trucks
conform to the European
Safety Requirements.
Jungheinrich UK Ltd.
Head Office:
Sherbourne House · Sherbourne Drive
Tilbrook · Milton Keynes MK7 8HX
Phone 01908 363100
Fax 01908 363180
[email protected]
www.jungheinrich.co.uk
Jungheinrich
Plants, Sales and
Services Europe
ISO 9001/ ISO 14001
7486_EKX_513-515_S_GB 20.10.2009 13:37 Uhr Seite 6