Jungheinrich ETV_Q20-25 - Manual

Travel in any direction thanks
to electronically controlled
all-wheel steering
Sensitive operation with
SOLO-PILOT control lever
Drive, lift and steering motors
use 3-phase AC technology
Jungheinrich Curve Control
for optimum stability
Hydraulic fork positioning for
various load widths (optional)
ETV Q20/Q25
Electric multi-directional reach truck (2,000/2,500 kg)
Jungheinrich multi-directional reach
trucks are used wherever long loads are
transported in narrow aisles and need to
be elevated at height. With their electric
all-wheel steering they can transport
loads up to 8 m long, maximising space
in the warehouse.
There are five travel programs available,
ranging from modified normal travel,
turning on the spot through to trans-
verse and parallel travel. In ‘enhanced
normal travel’, the already small turning
radius is reduced further by simultaneous
load wheel steering. The advantages of
360° steering are also available: Mini-
mum turning radius and rapid direction
change. This makes the ETV Q clearly
superior to any conventional 4-way
reach truck.
Uncomplicated, intuitive handling with
ergonomically arranged displays and
controls matched with outstanding
visibility makes operating the truck
simplicity itself. In addition, assistance
systems increase productivity:
• Jungheinrich Curve Control reduces
the maximum travel speed when cor-
nering, depending on the steer angle.
• Weighing systems allow weights to be
checked at the press of a button.
• Mast reach cushioning reduces
mast sway during stacking and re-
trieval operations, thereby increasing
throughput.
In addition to excellent performance, the
truck offers outstanding efficiency:
• Greater travel / lift performance for
more pallet throughput.
• Long operating times due to energy
recovery on braking the truck and load
lowering.
• Less aisle width required as a result of
the proven reach principle.
A number of options and battery versions
ranging from 620 to 930 Ah ensure that
the trucks can be adapted to any ap-
plication.