INTELLINET NETWORK ICC-130 User Manual - Manual (Page 71)

- 71 -
System Log
The Network Camera features a log function for system messages. These are
system messages about the camera start-up procedure, e-mail deliveries, FTP
uploads, motion detection and more. The camera stores the messages in its
internal memory and displays them on the system log screen. Since memory is
limited, the messages will eventually be truncated. If you need to log all the
system messages on a remote server (e.g., for permanent record keeping of
alarm events or for troubleshooting purposes), you can utilize the remote log
functionality.
Enable remote log: Server name: Type in the network address of the Syslog
server. Enter the address without any leading characters,
such as http://.
Server port: The standard port for this protocol is 514. If
your Syslog server is set up differently, you can change the
value here.
Current log: This text box displays the real-time log of the camera
messages.