beautypg.com

Video – day/night – INTELLINET NETWORK ICC-130 User Manual User Manual

Page 45

background image

- 45 -

Maximum frame rate: Type in the number of frames the camera should

generate per second of video. The higher the value, the smoother the video,

but the more bandwidth is going to be required. Valid entries are 1 to 30.

Quality: You can control the image quality of the video by selecting “Fixed

Quality” and defining the image quality by selecting one of the following values

“Medium,” “Standard,” “Good,” “Detailed” and “Excellent.” Or you can choose to

specify the bit rate of the video the camera must not exceed. In this mode the

camera varies the image quality automatically to not exceed the specified

maximum.

Video – Day/Night

Some Intellinet network cameras are equipped with active IR LEDs providing

the ability to capture video in complete darkness. Note, that if your camera is

not equipped with IR LEDs, this menu will not be available. Also note that some

menu items will vary depending on your camera model.

Infrared cut-off filters are designed to reflect or block mid-infrared wavelengths

while passing visible light. They are often used in network video cameras to

block IR due to the high sensitivity of many camera sensors to near-infrared

light. With the filter in place before the image sensor, the camera will not be

able to pick up IR light, but it generates true color video. Once the IR cut filter

is removed, the camera becomes IR light sensitive and will generate a black

and white image – and it does that even in complete darkness if the IR LEDs

are active.

IR Cut Filter Mode:

“Auto” – The camera decides when to remove the IR cut filter based on the IR

Cut Filter Threshold you can specify. The switch delay ensures that the camera

only switches the IR Cut Filter after the specified amount of time has passed.

“Day Mode” – In this mode the camera does not remove the IR Cut Filter from

the image sensor regardless of any other settings. Select the day mode if you

don’t want the Intellinet network camera to capture video in low light conditions

or darkness.