INTELLINET NETWORK ICC-130 User Manual - Manual (Page 58)

- 58 -
Onboot This is a one-time event that is triggered after the
camera has restarted.
IR Cut Filter This trigger event becomes active whenever the camera
enters the night mode and has removed the IR cut
filter. For example you can have the camera send you
an email informing you about this event.
Capacity Warning If you are using the SD Card storage option and you are
getting close to running out of storage space, this event
is being triggered. You could use this in order to send
you an email about this so that you can take
preemptive and corrective action.
Network Link Down This trigger type activates if the camera loses
connection to the network.
IP Notification This event is triggered when the network is being
restarted or the IP address has changed.
After you have selected the tripper type, you now have to define the action(s).
In other words, what do you want the camera to do if the event occurs?