INTELLINET NETWORK ICC-130 User Manual - Manual (Page 55)

- 55 -
2. How to add a SMTP Server:
Server Type: Select “SMTP.”
Mail Server: Type in the address
of your mail server. Do not type in
leading smtp:// or http://.
Server Port: Adjust the server port
if necessary. Port 25 is standard,
but your server may be using
different values (not so
uncommon these days as an anti-
spam measure).
Authentication: If your mail server
requires authentication in order to
send email, and most servers do
these days, set authentication to
“On” and define the type of
authentication below.
User Name and password:
Provide valid login credentials for the email server.
Send mail from: The camera will use this address as its own email address. This
email address does not necessarily need to be a valid address.
Send test email to: Enter the email address to which you want the camera to
send the images and click on Test. If the test succeeds you can provide the
information for the media settings and click “Save”. The actual target email
address is defined when you set up an event in the next section.
3. How to add a HTTP Server:
A HTTP server can be used by the camera to
trigger a script on a remote server if an event
occurs. User name, password and proxy fields
are all optional.