INTELLINET NETWORK NSC11-WN User Manual - Manual (Page 43)

43
2.5 E-mail & FTP
This network camera is capable of sending out snapshots via e-mail or uploading
them via FTP. There are two trigger events: Motion detection and schedule-based.
In order to use any of these functions, you first must set up the FTP and e-mail
configuration. We begin with the e-mail settings.
2.5.1 E-mail Settings
Item Description
Recipient E-Mail
Address Enter the address files are to be sent to. If you have more
than one e-mail recipient, you need to add a “;”
(semicolon) between every e-mail address. All e-mail
addresses combined cannot exceed 127 characters.
SMTP Server Enter the IP address or hostname of the SMTP server
(the server that delivers your e-mail). If you don’t know it,
refer to your e-mail software (e.g., Outlook or Outlook
Express) or ask your network administrator or ISP.
SMTP Port Input mail server’s SMTP port here. Most e-mail servers
use port number 25.
Sender E-Mail
Address Enter the address of the e-mail sender. This will make the
e-mail more readily identifiable as to its purpose and
importance.
NOTE:
Some servers won’t forward e-mail from unknown