INSTEON In-LineLinc Relay (2475S2) Manual - Manual (Page 11)

Page 11 of 14 Rev: 1/21/2014 7:57 AM
Warranty Two years, limited
Operation
Operation Modes INSTEON only, X10 only, INSTEON and X10 combo
Combo Mode Message Order INSTEON, INSTEON cleanup, X10
LED Indicator Off when load is on and vice versa
Multi-Way Circuit Support As a receiver and a controller
Setup Memory Non-volatile EEPROM
INSTEON Features
INSTEON Address 1 hard-coded out of 16,777,216 possible
INSTEON Links 417
INSTEON Powerline Frequency 131.65 KHz
INSTEON Minimum Transmit Level 3.2 Vpp into 5 Ohms
INSTEON Minimum Receive Level 10 mV
INSTEON Messages Repeated Yes
Mechanical
Mounting
Mounts in single or multiple-ganged junction box or fixture such
as a ceiling fan
Wire Nuts
6 included
Wires
Line (black)
Load (red)
Neutral (white)
Ground (bare copper)
Sense (yellow)
Dimensions 2.75" H x 1.75" W x 0.88" D
Weight 2.9 oz.
Operating Environment Indoors
Operating Temperature Range 32°F to 104°F
Operating Humidity Range Up to 85% relative humidity
Electrical
Supply Voltage 120V AC +/- 10%, 60 Hz, single phase
Sense Voltage 120V AC
Power Wire Leads
6", 18 AWG, stranded, 600V, 105°C insulation, ends stripped
and tinned, Line (black), Load (red), Neutral (white), Sense
(yellow)
Load Wire Leads
6", 14 AWG, stranded, 600V, 105°C insulation, ends stripped
and tinned, Line 1 (red, paired w/ Line), Line 2 (red)
Ground Lead 6”, 18 AWG, stranded, bare copper
Compatible Load Types Wired-in incandescent lighting and inductive loads
Maximum Load 480 watts (for incandescent loads)