Hardware specification and configuration – Acer 1000 User Manual
Page 54

44
Chapter 1
Hardware Specification and Configuration
Processor
System Main Chipset
North Bridge
Item
Specification
Type
AMD Turion
TM
64 X2 dual-core TL-50/TL-52/TL-56/TL-60 processor
Feature
•
AMD 638-pin Lidless Micro PGA package
•
64-bit integer registers, 48-bit virtual addresses, 40-bit physical addresses
•
Eight new 64-bit integer registers (16 total)
•
Eight new 64-bit SSE registers (16 total)
Power
•
Multiple low power states
•
System Management Mode (SMM)
•
ACPI compliant, including support for processor performance states
•
AMD PowerNow!
TM
technology is designed to dynamically switch
between multiple low power states based on application performance
requirements
Item
Specification
Core logic
ATi RS485M + ATi SB460
System clock
ICS ICS951462
BIOS ROM
SST 39VF080
KBC
NSPC97551
PCMCIA & IEEE 1394 &
Memory card reader
PCI7412ZHK
Super I/O
NSPC87383
IR
Vishay TFU6102F
Audio Codec & Amplifier
Realtek ALC883D Azalia Codec and Amplifier Maxim
MAX4411
LAN
Broadcom 5788M
Item
Specification
Chipset
ATi RS485M
Package
465-pin FCBGA package, 21mm x 21mm
Feature
•
200/400/800/1000MHz HyperTransport interface support
•
One x 16 graphics interface used by another device
•
Highly-optimized 128-bit engine, capable of processing multiple pixels
per clock
•
Integrated dual 24-bit LVDS interface
•
595Mbps/channel with 85MHz pixel clock rate
•
External displays (e.g., flat panel, CRT or TV) via a DVO port support
•
ACPI states S1, S3, S4 and S5 fully supported
Power
1.8V core, 3.3V, 5V CMOS I/O