Led indicators, Charging the phone, Led indicators charging the phone – Acer 1000 User Manual
Page 31
Chapter 1
21
LED Indicators
Charging the Phone
You need to charge the phone before initial use. It takes approximately four hours for a full
charge. To charge the phone:
1.
Turn the notebook on.
2.
Locate the PC Card (PCMCIA) slot.
3.
Insert the phone to the slot label up. Make sure that the phone is completely pushed on the slot.
Note:
The notebook detects the device and displays a New Device Wizard window. Click No, not
this time, then close the window.
4.
The power/charge indicator lights up during charge and turns off when the battery is full. Eject the
phone from the PC Card slot when charging is finished.
LED
Color
Status
Description
Bluetooth
connection/
pairing
indicator
Blue
Blinking fast
The phone is in pairing mode.
Blinking slow
The phone is linking with the notebook.
Off
The phone is not paired or linked with the
notebook.
Charge/Power
indicator
Amber
On
The phone is charging.
Off
The phone is fully-charged.
Blinking
The phone needs to be recharged.
Note:
New Device
Wizard
No, not this time,