Hach-Lange NISE sc - Manual (Page 39)

Description Catalog number
39
Section 7 Replacement parts and accessories
Description Catalog number
Description Catalog number
7.1 Replacement parts
AN-ISE sc (probe with built-in 10-m cable and a pre-calibrated sensor cartridge) LXV440.99.000x1
AISE sc (probe with built-in 10 m cable and a pre-calibrated sensor cartridge) LXV440.99.100x1
NISE sc (probe with built-in 10 m cable and a pre-calibrated sensor cartridge) LXV440.99.200x1
Calibrated sensor cartridge 1 LZY694
Cleaning brush LZY589
Black gasket LZY713
Cartridge screw set (4 screws and socket head wrench) LZY715
Protective cap for reference system LZY588
Cable clip for AN-ISE sc LZY717
Cable clip for AISE sc LZY697
Cable clip for NISE sc LZY698
1 Sensor cartridges are wearing parts and are not covered by the instrument warranty.
7.2 Accessories
Cleaning unit LZY706
Rail mount 6184900
Chain mount LZX914.99.12400
Stainless steel rim mount LZX414.00.80000
High Output Air Blast compressor 115 V/50 Hz 6860003.99.0001
High Output Air Blast compressor 230 V/50 Hz 6860103.99.0001
Test cartridge LZY720
Polishing paper for chloride electrode (only for AN-ISE sc and NISE sc) LZY671
7.3 Validation accessories
Nitrate cuvette test (measurement range: 0.23–13.5 mg/L NO
3
–N/1–60 mg/L NO
3
) LCK 339
Nitrate cuvette test (measurement range: 5–35 mg/L NO
3
–N/22–155 mg/L NO
3
) LCK 340
Chloride cuvette test (measurement range: 1–1000 mg/L Cl) LCK 311
Chloride test strips (measurement range: 30–600 mg/L Cl) 27449-40
Ammonium cuvette test (measurement range: 2–47 mg/L NH
4
–N/2.5–60.0 mg/L NH
4
) LCK 303
Ammonium cuvette test (measurement range 1–12 mg/L NH
4
-N/1.3–15.0 mg/L NH
4
) LCK 305
Potassium cuvette test (measurement range: 5–50 mg/L K) LCK 228