Hach-Lange EVITA OXY User Manual - Manual (Page 24)

22
The menu of the signal converter is built up in two
parts. An operator menu and a setup menu.
Fig. 32
Operator menu
The operator menu is for daily use. After the
language has been selected, the signal converter
starts up in the operator menu showing the actual
concentration of dissolved oxygen.
Oxygen
Transmitter 0
12.31 mg/l
Temperature
Transmitter 0
Rem. Lifetime
Transmitter 0
Calibration
Transmitter 0
50.%
No. of alarms
Transmitter 0
Oxygen
Transmitter 1
7.09 mg/l
Temperature
Transmitter 1
Rem. Lifetime
Transmitter 1
Calibration
Transmitter 1
85.%
No. of alarms
Transmitter 1
Oxygen
Transmitter 2
2.51 mg/l
Temperature
Transmitter 2
Rem. Lifetime
Transmitter 2
Calibration
Transmitter 2
70.%
No. of alarms
Transmitter 2
Oxygen
Transmitter 15
6.22 mg/l
Temperature
Transmitter 15
Rem. Lifetime
Transmitter 15
Calibration
Transmitter 15
95.%
No. of alarms
Transmitter 15
0
Scan HART bus
081R9301.02.01
Error pending
Reset lifetime
Transmitter 0
Reset lifetime
Transmitter 1
Reset lifetimes
Transmitter 2
Reset lifetime
Transmitter 15
18.5°C
18.5°C
18.5°C
18.5°C
0
0
0
Last calibration
Transmitter 0
72. d
Last calibration
Transmitter 1
26. d
Last calibration
Transmitter 2
84. d
Last calibration
Transmitter 15
71. d
The USC 5000/6000 is point-to-point installation
while the USC 7000 is for a multidrop system. In fi g.
32 menus marked with grey are only visible in the
multidrop system. It is possible to hide some of the
menus in the operator menu, see fi g. 43, p. 34.
Menu structure