Clear-Com FIM-202D - Manual (Page 22)

Clear-Com Communication Systems
FIM-202D Matrix Fiber Interface Instruction Manual
4 - 2
Matrix Data Communications (Frame-to-Panel Digital
Data)
Transmission Rate RS-422, Balanced TTL Levels, 0 to 150
kBits/sec
Jitter 1.12 msec*
*Higher rates possible dependent upon user system jitter tolerance.
Power Requirements
Voltage 9-18 VDC
Warning:Absolute maximum voltage is 18 VDC. Equipment
damage may occur at higher voltages.
NOTICE ABOUT SPECIFICATIONS
While Clear-Com makes every attempt to maintain the accuracy of the
information contained in its product manuals, that information is
subject to change without notice. Performance specifications included
in this manual are design-center specifications and are included for
customer guidance and to facilitate system installation. Actual
operating performance may vary.