Clear-Com AB-120 - Manual (Page 24)

Clear-Com Communication Systems
AB-120 Announcer Console Instruction Manual
3 - 2
Max Gain
Dynamic Mic - Party Line 41 dB ± 3 dB
Dynamic Mic - Hot Mic Out 40 dB ± 3 dB
IFB Input - Headset Out 40 dB/22 dB (switchable) ± 3 dB
Party Line - Headset Out 34 dB ± 3 dB
Rear Panel Connectors
Headset XLR-6F
Microphone Out XLR-3M
Intercom 2 XLR-3 (Male and Female Loop
through)
IFB XLR-3F
Power 2.1mm jack
Front Panel Controls and Indicators
(1) Mute button
(1) Mute indicator LED (red)
(1) Talk back button
(1) Talk back indicator LED (green)
(1) Interrupt level control
(1) Non-interrupt level control
POWER REQUIREMENTS
Intercom/IFB Voltage 25-30 VDC
Current 100mA idle, 120mA max
DC Adapter 100 - 240V
Voltage 30V @ 0.5A
PHYSICAL SPECS
Dimensions 6”W x 3”H x 8”D
(152mm x 76mm x 203mm)
Weight 2 lbs or 0.9 kg
Operating Temp Range 32 - 122°F (0 - 50°C)
Notice About Specifications
While Clear-Com makes every attempt to maintain the accuracy of the
information contained in its product manuals, that information is
subject to change without notice. Performance specifications included
in this manual are design-center specifications and are included for
customer guidance and to facilitate system installation. Actual
operating performance may vary.