Clear-Com KB-701 - Manual (Page 13)

K B - 7 0 1 S P E A K E R S T A T I O N
2 - 1
INSTALLATION
1. Unpack the unit and inspect it for any damage that may have occurred
during shipping.
2. Set the option switches to the default (toward the front panel) position.
3. Connect the intercom lines.
4. Install the KB-701 into the four-gang outlet box or V-Box. (For additional
information, refer to the Clear-Com System Installation Manual.)
5. Set listen levels. (Refer to “Intercom Level Control.”)
6. The speaker station should now be operating properly.
Read the rest of this manual for further information.