CAME BX-241 - Manual (Page 2)

2
A
ll t
h
e d
at
a a
n
d i
n
fo
rm
at
io
n c
o
n
ta
in
ed h
er
ei
n
i
s c
o
n
si
d
er
ed
s
u
b
je
ct to c
h
an
g
e a
t a
n
y t
im
e a
n
d a
t o
u
r d
is
cr
et
io
n
ENGLISH
4.1 Gearmotor
The BX-241 ratiomotor is designed and built by CAME CANCELLI AUTOMATICI S.p.A. and it meets the safety standards in force.
Guaranteed 24 months if not tampered with.
The casing is made up of a fused aluminium part where the irreversible electromechanical ratiomotor is housed and an ABS plastic-
lined part that encloses the electronic board, the battery charger board and the bracket to house the two emergency batteries.
The BX-241 ratiomotor may be supplied with complementary accessories such as:
001 R001 - Lock cylinder with DIN keys;
001 BSF - Braking device for gates installed on a sloping surface;
001 BRC5/10/15 - Power supply cable winding device for sensitive safety profi les;
001 B4337 - Chain transmission device;
009 CGZ - Galvanized steel 22 x 22 module 4 rack;
009 CGZF - PA 6 nylon 20 x 32 module 4 rack with holes and fi xing spacers;
009 CGZS - Galvanized steel 30 x 8 module 4 rack with fastening screws, holes and supports;
009 CCT - Simple 1/2” chain;
009 CGIU - 1/2” chain joint.
Important! Check that the safety equipment and accessories are CAME originals; this is a guarantee that also makes the system
easy to set up and upkeep.
4 Description
2.1 Destination
The following standard were complied with for this product: EN 12978, UNI EN 954-1, CEI EN 60335-1, UNI EN 12453.
The BX-241 ratiomotor is for the automation of sliding residential gates, even in cases of intense traffi c.
The use of this product for purposes other than the one intended and installation carried out in a manner other than as
instructed in this technical manual are prohibited.
3 Standard followed
2.2 Limits of use
For residential use: maximum gate weight 800 kg with maximum length of 14 meters.
For intensive or condominium use: maximum gate weight 600 kg with maximum length of 14 meters.
4.2 Technical information
BX-241 GEARMOTOR
Power supply: 230V A.C. 50/60Hz
Motor power supply: 24V D.C. 50/60Hz
Max. absorption: 17A
Rated power: 400W
Max. torque: *27 Nm
Reduction ratio: 1/33
—#
—#
Push: 700 N
Max. speed: 10 m/min
Operation intermittence: intensive with gates of up to 600 kg
Protection level: IP54
Weight: 15 kg
Operating temperature:
1 Legend
This symbol indicates sections to be read with particular care.
This symbol indicates sections concernig safety
This symbol indicates notes to communicate to users.
“IMPORTANT SAFETY INSTRUCTIONS FOR INSTALLATION”
“CAUTION: IMPROPER INSTALLATION MAY CAUSE SERIOUS DAMAGE, FOLLOW ALL INSTALLATION INSTRUCTIONS CAREFULLY”
“THIS MANUAL IS ONLY FOR PROFESSIONAL INSTALLERS OR QUALIFIED PERSONS”
2 Destination and limits of use
* Obtained with CAME control panel.