Hydrotech PURA Max and Max Plus 15-LBGH2-PURA, 15-LBGH2-UV-PURA Operation Manual - Manual (Page 5)

5
The lid, which simply snaps into place, will help minimize mold and mildew buildup inside the cold tank by
providing a “sealed” environment. Please note the arrow (with sticker on side of foam insulation) for proper
installation. To ensure the level float operates correctly, please align the tab on the new plastic lid with this
arrow. Refer to the pictures shown below. This change does not impact the way you setup and operate the
machine. Also changed on the unit is the addition of a small GAC filter designed to be placed on the inlet
return of the recirculating UV loop inside the cold tank. This filter comes packaged with the machine inside
the plastic bag contained in the drip tray. This filter is designed to continually filter impurities in the water,
and to eliminate the need for rinsing the machine upon initial installation. The small end of the filter connects
into the return port from the UV loop inside the cold tank. This filter does not require replacement on regular
intervals. Prior to using the machine, the filter needs to be rinsed and flushed (to a drain, not through the
machine) with a gallon of water to remove carbon fines.
Arrow Sticker
Lid Tab