Hydrotech Precision-PWS 5-3 OWNERS GUIDE - Manual (Page 3)

PRECISION DESIGN & MFG. PWS 5-3 DISTILLER WARRANTY
Precision Design & Manufacturing Inc. offers a limited warranty against defects in material and
workmanship to the original purchaser. The warranty includes full replacement on defective
electrical components, other parts and labor for a period of two full years. A 15 year limited
warranty applies to all stainless steel parts. Pro-rated as follows:
Year 1-5 - 100%
Year 11 - 25%
Year 6 - 50% Year 12 - 20%
Year 7 - 45% Year 13 - 15%
Year 8 - 40% Year 14 - 10%
Year 9 - 35% Year 15 - 5%
Year 10 - 30%
Precision Design & Manufacturing Inc. is not responsible for or obligated to pay costs of
removal, installation or any shipping charges in relation to the claimed warranty.
Warranty is invalid if damage is caused by: product misuse, improper installation, signs of
alteration, product neglect, shipping damage, mishandling, vandalism or act of God.
This warranty is the only expressed warranty. Any other warranty is not valid.
Precision Design & Manufacturing Inc. believes that the information contained in this manual is
accurate. Parts, instructions and specifications are subject to change without notice.
IMPORTANT FACTS
Please take the time to fill out and return the warranty information form found at the back of
this manual. Please remove warranty registration form and send to the following address:
Precision Design & Manufacturing Inc.
10331 – 105 Street
Westlock, Alberta
T7P 2H7
Or Fax To: (780)349-4957
Your new distiller is tested for leaks and proper operation at the factory prior to shipment. As a
result of this test your distiller will likely have a visible water ring inside the boiling tank.
Proper cleaning of the boiling tank is important. This is necessary to produce the purest water
possible and assure trouble free operation of your equipment.
The boiling tank is TIG (Tungsten Inert Gas) welded. As water is boiled, minerals may cling to
the weld, appearing as rust. This does not affect the quality of the water!
Cool air is required to operate your distiller. Do not restrict airflow by placing objects around or
tightly against the distiller. This appliance is intended for household use.
The distiller must be plugged directly into a wall outlet, which should be on a dedicated circuit.
04/08/04
3