Hydrotech Precision-PWS 5-3 OWNERS GUIDE - Manual (Page 10)

04/08/04
10
STEP 8 LETS MAKE WATER
1. Secure boiling tank lid.
2. Make sure the power and fan water switches are at the ON position.
3. Your distiller is working.
4. It will automatically shut off when the first cycle has been completed.
5. As you remove water from the storage tank the distiller will start automatically.
STEP 9 MANUAL FILL OPERATION
Turn the water fill off at the rear of the distiller. Then your PWS 5-3 is a manual fill system,
requiring you to fill the boiling tank each time. Please note that there is a water gauge pin
present in the boiling tank. It is important that water is never filled higher than the bottom of
the water gauge pin.
Water Level
Water Gauge
Boiling Tank Opening