Acer IEEE 802.11b WLAN PC Card User Manual
Page 18
17
2.4.1.3 Basic Setting for Ad Hoc Mode
If you have more stations and just want to set them as local network, you can also
select Ad Hoc Mode on your WLAN Utility. The procedure is as follows.
•
Select the Mode as ” Ad Hoc”.
•
Select the correct channel.
! Channel shows radio channel numbers used for networking. Channel
number must be the same between stations so that computers can
communicate in the local LAN. It can be changed only under the 802.11 Ad
Hoc Mode and Ad Hoc Mode.