GxT Ferret 31 Scan Tool - Manual (Page 10)

10 11
Non Continuous System Test Mode
Select Non-Cont. Sys Test from the
Test Mode Menu and press enter.
Non continuous tests are run one
time per trip. Testing methods and
identification of components differ
between vehicles.
Use the up and down keys to scroll
through the list of data.
Data regarding Non-Continuous
tests modes and results should
be available from the vehicle
manufacturer and/or publishers of
vehicle data.
Continuous System Test Mode
Select Cont. System Test from the
Test Mode Menu and press enter.
Continuous tests are trouble codes
that have not resulted in the MIL light
to be illuminated.
Use the up and down keys to scroll
through the list of data.