Global Specialties 3600 - Manual (Page 14)

Users Manual Model 3600
www.globalspecialties.com Page 9
Channel Setting
Channel Order Setting
The double digit numbers 00-31 on the left side of the waveform
display frame are the serial numbers for each channel. Press
【Channel】
key to select the channel serial number setting. Then set the channel
sequence using the numeric keys. The settings only change the position
of channel waveforms on the screen so that different channels of
waveforms can be closely displayed and easily compared. However
the real positions of sampling channels and the sampled data are
not changed. If the real positions of sampling channels need to be
changed, the user needs to change the connection of the test hooks for
sampling on the circuit board.
Channel Label Setting
The four characters on the right of the channel serial numbers are the
label of the channel. Press
【Channel】key to select the channel label
setting. Set the channel label by using the numeric keys or letter keys.
Every channel label can be set by the user.
Channel Color Setting
Press 【Channel】key to select the desired channel color setting. Set
the color using the numeric keys. Every channel can be set according to
user’s choice of color.
Channel Switch Setting
Press the 【Channel】 key to select channel switch setting. Set the
channel “on” by using the numeric key 【1】. Set the channel “off” by
using the key 【0】. The settings will take effect in the process of next
sampling display.
Generally, the settings of the channels are not required to be changed
often. Press
【Save】to save the defined channel settings to re- use then
without having to reset the settings.
Threshold Setting
Press the 【Threshold】key to set the threshold voltage setting. The
【↑】and【↓】pushbuttons are used to circularly select one of the
six threshold voltages. Only the knob can be used to set the value
of threshold voltages in a continuous manner (numeric keys can’t
Model 3600 User Manual_B.indd 9 7/2/2010 4:41:44 PM