Global Specialties 3600 - Manual (Page 12)

Users Manual Model 3600
www.globalspecialties.com Page 7
Waveform Interface Display
The Waveform Interface displays 8 channels of timing waveforms,
the serial number and the name of the waveform and includes four
different vertical cursor lines in varied colors. There is one scale on the
top of the waveform frame, and another one is on the bottom of the
waveform frame. These are the zoom scales. The time value of every
scale varies with the zoom coefficient. Below the waveform frame
is the parameters display frame, the six parameters on the left is the
state parameters which varies automatically with different operations,
showing the current state of the equipment. The six parameters on the
right is the parameters settings of the system and can be set with the
numeric pushbuttons.
Data Interface Display
The data interface displays 19 rows of data. Each row is one sampled
data point in memory, corresponding to 32 sample channels. The three
columns of data from left to right is the address of data, the data
value in Decimal (Dec), the data value in Hex, the data value in Binary
(Bin). The parameters display frame is below the data lists frame, the
three parameters on the left are the state parameters which changes
automatically with different operations, showing the current state
of the instrument. The 2 parameters on the right are the parameters
settings of the system and can be set with numeric pushbuttons.
Trigger Interface Settings
The trigger interface displays the whole trigger process. It utilizes a
graphical display mode to easily illustrate the entire triggering process.
The panes in the display interface are the nodes of the trigger process.
The connecting lines among the panes show the direction of the trigger
process, six parameters can be set on the right, the left side has six
switches for setting. The specifications of these settings are explained
later in this manual.
Operating Instructions
Initialization
Turn on the Model 3600 using the front panel ON/OFF pushbutton. The
model number and the manufacturer of the instrument will first be
seen on the display. Operate the initialization program by loading the
Model 3600 User Manual_B.indd 7 7/2/2010 4:41:43 PM