beautypg.com

Safety precautions, Danger – Gardner Bender CP8006 Powered Cable Puller User Manual

Page 5

background image

3

DANGER

DANGER

DANGER

CP800 Power Head with Bracket

• 120 VAC 50/60 HZ rectified to D. C.

• 15 AMP - Start Up

• 5 AMPS @ No Load

• 5.5 AMPS per 1,000 lbs.

• Max. 20 AMPS @ 8,000 lbs.

• Permanent Magnet Motor

• Weight 65 lbs.

• Maximum Pulling Capacity - 8,000 lbs.

• Capstan - 12 R.P.M.

• On-Off Toggle Switch

• 3-Prong Grounded Power Cord

• Non-Reversing Capstan

• Load Meter

The powered cable puller CP800 and its accessories are designed specifically
for pulling electrical cable through conduit or across cable trays. GB does not
recommend pulling any other objects or materials. Using this unit for any other
pulling or lifting activity could result in serious injury or death.

Operate the Cable Puller only in well lighted areas.

All pull set-ups must be approved by qualified supervisors. Follow all safety
precautions and wear appropriate safety clothing.

Keep the pull rope away from the operator’s feet. Coil the tailing rope in an area
where the operator cannot become entangled.

Never stand directly under a vertical pull. Do not stand directly in front of a pull
rope under tension. The operator must stand at an angle to the capstan. Keep all
other personnel away from the cable puller.

Inspect all cable puller components prior to pulling cable. Never use worn or
damaged parts or accessories.

Never use general purpose rope. Use only GB double braided polyester, 3/4”
diameter rope. All rope must have a working load of 8,000 lbs. minimum.
Rope that breaks under tension may recoil, causing serious injuries and property
damage.

After each pull, inspect the rope for abrasion and cuts in the strands. Do not use
damaged rope for pulling cable.

SPECIFICATIONS

Power Cable Puller CP800

Figure 1

SAFETY PRECAUTIONS

Do not allow pull rope to wrap around the legs, arms or torso of anyone. A quick
release of the rope will cause severe injuries.

Cable puller models CP800, CP8003, CP8006 and CP8000D plus accessory
items are rated at 8,000 lbs. maximum pulling force. Attempts to exceed 8,000
lbs. could result in severe injury, death and major property damage.

CP806

CP10

CP802