Gardner Bender PVC Plugs 2 thru 6 - Manual

To avoid burns to hands, always
wear protective welding type gloves when heating
and bending PVC conduit.
Heated PVC conduit reaches
temperatures of approximately 300 o F. Do not
attempt to install PVC plugs in heated conduit.
IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping
damage is found, notify carrier at once. Shipping damage is NOT covered by warranty. The carrier is responsible for
all repair or replacement costs resulting from damage in shipment.
Gardner
Bender
Instruction
Sheet
IMPORTANT USER SAFETY AND PROTECTION: In setting up systems to fit your operations, care must be taken
to select the proper components and design to insure appropriate integration with your operations and existing
equipment and that all safety measures have been taken to avoid the risk of personal injury and property damage
from your application or system.
GB ELECTRICAL, INC. CANNOT BE HELD RESPONSIBLE FOR DAMAGE OR INJURY CAUSED BY UNSAFE
USE, MAINTENANCE OR APPLICATION OF ITS PRODUCTS. Please contact GB Electrical technical service
department for assistance if you are in doubt as to the proper safety precautions essential to designing and setting
up your particular application.
PVC
Plugs
2" thru 6"
Important : Leave plugs in the conduit until heating and
bending is completed. The plugs help retain heat and help
retain conduit shape.
BVP60 BVP50 BVP40
BVP30 BVP25 BVP20