Burkert Type 8030 - Manual (Page 3)

3
About the supplement
1 About the supplement
This supplement is an addition to the operating instructions of the flow-
meter type 8030. This supplement is only related to the flowmeter type
SE30 Ex with the order code 552353. Please keep this supplement in
a safe place, accessible to all users and any new owners.
This supplement contains important safety information.
Failure to comply with these instructions can lead to hazardous
situations. This supplement must be read and understood.
▶ Carefully read this supplement and the operating instructions of
the flowmeter type 8030.
▶ Particular respect must be paid to the chapters "Conforming
Use", "Basic Safety Information" and to the standard EC design-
examination certificate established by INERIS.
1.1 Definition of the word "device"
The word "device" used within this supplement refers to the flow-
meter type SE30 Ex.
2 IntenDeD use
Use of the device that does not comply with the instructions
could present risks to people, nearby installations and the
environment.
▶ The hall effect flowmeter SE30 Ex is intended to measure the
flow rate of neutral or slightly aggressive liquids free of solid
particles. It is designed to operate in an explosive atmosphere II
3 GD, temperature class T4.
▶ This device must be protected against electromagnetic interfer-
ence, ultraviolet rays and, when installed outdoors, the effects of
climatic conditions.
▶ This device must be used in compliance with the characteristics
and commissioning and use conditions specified in the contrac-
tual documents and in the user manual.
▶ Requirements for the safe and proper operation of the device
are proper transport, storage and installation, as well as careful
operation and maintenance.
▶ Only use the device as intended.
2.1 ex certification
Ex certification is valid as long as the device is used in compliance
with this supplement.
type se30 ex
English