General information, Application conditions for the units, Conformity 5.2. standards 5.3. special conditions – Burkert Type 1058 User Manual
Page 7
7
General Information
4. GENERAL INFORMATION
4.1. Contact addresses
Germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: [email protected]
International
Contact addresses can be found on the final pages of the printed
operating instructions.
And also on the Internet at:
4.2. Warranty
The warranty is only valid if the device is used as intended in accordance
with the specified application conditions.
4.3. Information on the Internet
The operating instructions and data sheets for Bürkert products can
be found on the Internet at:
5. APPLICATION CONDITIONS FOR
THE UNITS
5.1. Conformity
Type 1058 conforms with the EC Directives according to the EC
Declaration of Conformity.
5.2. Standards
The applied standards, which verify conformity with the EC Direc-
tives, can be found on the EC-Type Examination Certificate and / or
the EC Declaration of Conformity.
5.3. Special conditions
Reference is made on the EU type sample test certificate to DIN EN
50028 status 1987. This standard does not differentiate between
protection levels “ma” and “mb”. If this differentiation must be made,
these fuses must only be used for protection level “mb”.
english
PTB 01 ATEX 2064 U