Burkert Type 1058 - Manual (Page 5)

5
Intended Use
2. INTENDED USE
WARNING!
The device may only be used for the applications indicated in
the chapter
Operating conditions for the devices, and only in
connection with third-party devices or components recommended
or approved by Bürkert. Observe the instructions in this operating
manual, as well as the conditions of use and permissible data
specified in the chapter
Operating conditions for the devices.
The proper and safe function of the system depends on proper
transport, storage and installation, and on careful operation and
maintenance.
• The type 1058 equipment protection fuse is used to protect
small electrical consumers, e.g. electromagnets for valve control
in areas subject to explosion for application in explosion group
II, category 2 and temperature class T4 (see data on the
approval plate).
• Any other utilisation, or a utilisation going beyond this use will
be regarded as improper. Bürkert will accept no liability for any
damage resulting from such use. The user must bear all the risk
alone.
2.1. Restrictions
If exporting the system/device, observe any existing restrictions.
3. GENERAL SAFETY INSTRUCTIONS
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations, whereby the operator is responsible for their
compliance, by the installation personnel too.
DANGER!
Danger of explosion!
The device is a sealed system. If used in the EX area, there is a
danger of explosion if the system is opened during operation!
• The system must not be disassembled during operation.
Electrical power supply in the system!
Acute risk of injury from hazardous structure-borne voltage! Risk of
damage to the device due to short circuit!
• Work on the electrical system may only be carried out by qualified
electricians.
• Before starting work, switch off the power supply and secure to
prevent it being switched on again!
• Observe the applicable accident prevention and safety regula-
tions for electrical devices!
english
PTB 01 ATEX 2064 U