Burkert Type 1058 - Manual (Page 6)

6
General Safety Instructions
DANGER!
Danger – high pressure!
There is a serious risk of injury when reaching into the system.
• Only skilled and instructed personnel may work on the system
with suitable tools.
• Before disconnecting lines and valves, switch off the pressure
and bleed the lines.
• During installation note the direction of flow.
• Observe applicable accident prevention and safety regulations
for pressurised devices!
• After an interruption in the power supply or fluid supply, ensure
that the process is restarted in a defined or controlled manner!
General hazards!
Unintentional activation or unauthorised impairment of the system
may cause general hazardous situations through to physical injury.
• Take appropriate measures to prevent the system from being
accidentally actuated!
• Do not make any unauthorised changes to the system.
Non-observance of the generally acknowledged safety rules may
cause general hazardous situations through to physical injury.
• Observe the generally acknowledged safety rules for resource
planning and operation of the device.
The device was developed with due consideration given to
the accepted safety rules and is state-of-the-art. However,
dangers can still arise. Operate the device in perfect
working order only and in accordance with the operating
instructions.
3.1. Approval
The EC Type Examination Certificate PTB 01 ATEX 2064 U was
issued by the
PTB (Physikalisch Technische Bundesanstalt)
Bundesallee 100
38116 Braunschweig (Germany)
which also audits production (CE0102).
english
PTB 01 ATEX 2064 U