Avocent CCM1640 - Manual (Page 83)

Chapter 5: CCM Commands 77
A Show User All command display includes the information in the following table.
Show User All Command Display Fields
Field Contents
User Username.
Pass YES if user has a password defi ned, NO if not.
Key YES if user has an SSH key defi ned, NO if not.
Lock YES if user is locked-out, NO if not.
Level User’s access level. If a level was not confi gured, access rights
determine the level:
Users with SCON access => APPLIANCEADMIN.
Users with USER but not SCON => ADMIN.
Otherwise, USER level is assigned..
Access User’s access rights.
SPC Command
The SPC command is reserved for future functionality .
User Commands
The User command has several forms, as listed in the following table.
User Command Summary
Command Description
User Add Adds a new user to the CCM user database.
User Delete Deletes a user from the CCM user database.
User Logout Terminates a user’s active CCM session.
User Set Changes a user’s confi guration information.
User Unlock Unlocks a locked-out user.
User Add command
The User Add command adds a new user to the CCM user database. The CCM
user database holds a maximum of 64 user definitions. For more information,
see Managing Users, Connecting to devices using SSH and Access rights and
levels in Chapter 3.
Access right: USER
Access level: ADMIN or APPLIANCEADMIN