Avocent CCM1640 - Manual (Page 63)

Chapter 5: CCM Commands 57
When you are in port history mode, you may issue the following commands.
Port History Mode Commands
Command Description
Bottom B sets the history view location to the bottom of the fi le minus 23
history display lines, if available.
Clear C clears the port’s history buffer.
Next N increments the current history display line by the number of lines
per page and a new history display page is output.
Prev P decrements the current history display line by the number of lines
per page and a new history display page is output.
Quit Q returns to the normal CLI.
Resume R exits port history mode and CLI mode, and resumes the serial
session with the attached serial device.
Search S searches the port history buffer for a specifi ed string. Enclose
strings containing embedded spaces in quotes. To specify search
direction, type -u (up) or -d (down). To ignore case, type -i.
Top T sets the current history display line to 1 and outputs a history
display page.
Examples
The following command accesses the serial port’s history mode.
> port history
In history mode, the following command searches the history buffer in the
downward direction for the string “connected to,” ignoring case.
PORT HISTORY > s -d -i “connected to”
Port Logout command
The Port Logout command terminates the CCM session on a specified port.
Access right: USER
Access level: ADMIN or APPLIANCEADMIN
Syntax
PORT <port> LOGOUT
Port Logout Command Parameter
Parameter Description
<port> Port number in the range 1-8 for a CCM840 or 1-16 for a CCM1640.