AMD GA-M55S-S3 - Manual (Page 45)

BIOS Setup - 45 -
English
2-7 MB Intelligent Tweaker(M.I.T.)
CPU Frequency (MHz)
200 ~ 500 Set CPU Frequency from 200MHz to 500MHz. (Default value: Auto)
PCIE Clock (MHz)
100 ~ 200 Set PCIE Clock from 100MHz to 200MHz. (Default value: Auto)
CPU Clock Ratio
This setup option will automatically assign by CPU detection. The option will display "Locked" and
read only or will not show up if the CPU ratio is not changeable.
DDR2 Voltage Control
Please note that by overclocking your system through the increase of the DDR2 voltage, damage
to the memory may occur.
Normal Set DDR2 voltage to Normal. (Default value)
+0.025V ~ +0.700V Set DDR2 voltage from +0.025V to +0.700V.
Chipset/PCIE Voltage
Set the voltage settings for chipset and PCI Express bus.
Normal Set chipset and PCE Express bus voltage to Normal. (Default value)
+0.025V ~ +0.375V Set chipset and PCE Express bus voltage from +0.025V to +0.375V.
HT-Link Voltage
Set the voltage settings for HT-Link.
Normal Set HT-Link voltage to Normal. (Default value)
+0.025V ~ +0.375V Set HT-Link voltage from +0.025V to +0.375V.
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Frequency (MHz) [Auto]
PCIE Clock (MHz) [Auto]
CPU Clock Ratio [Auto]
DDR2 Voltage Control [Normal]
Chipset/PCIE Voltage [Normal]
HT-Link Voltage [Normal]
CPU HT-Link Voltage [Normal]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.3500V
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
Incorrectly using these features may result in system instability or corruption.
Doing a overclock or overvoltage on CPU, chipsets and memory modules may result in
damages or shortened life expectancy to these components.
Please be aware that the M.I.T. menu items are for power users only.