EXP Computer IEEE 1394 Firewire CD-RW Station User Manual

Page 9

- 9 -

SOFTWARE INSTALLATIO

SOFTWARE INSTALLATION FOR MACINTOSH

N FOR MACINTOSH

1. Before install the Portable CD-RW, please check the version of your

FireWire driver in system, the version higher than 2.5 is recommended.

Follow the below procedures to check the version.

A. Double-click ‘Macintosh HD’ on desktop.

B. Double-click ‘System Folder’ in the opened window.

C. Double-click ‘Extensions’ folder.

D. Click on ‘FireWire Support’ in the list.

E. Click ‘File’ ‘Get Info’ ‘General Information’ to open the

information window.

F. Check the ‘Version’, if the number is lower than 2.5 (it could be

version 2.2.2), we suggest you upgrade it to version 2.5 or higher.

Please go to the homepage of Apple Computer Inc. –

http://www.apple.com

, after link to the homepage, go into ‘Support’

‘Download’, and download the ‘FireWire Update’ to upgrade your

FireWire driver.

2. After check the FireWire driver and upgrade it, connect the AC adapter

plugs into the DC IN Jack at the rear panel of the CD-RW, attach the AC

adapter to the AC power outlet. Plug the port connector of the IEEE

1394 cable into the IEEE 1394 port of computer.

3. Now you can use the Portable CD-RW as a CD-ROM drive, it can read

disc but still can’t write data to disc.

4. You must install the CD Recording Software that came with the drive

before you can perform the write and rewrite functions on the CD-RW

drive