EXP Computer IEEE 1394 Firewire CD-RW Station - Manual (Page 3)

- 3 -
SOFTWARE INSTALLATION FOR WINDOWS 98 SE
NOTE: The IEEE1394 interface only works under Win98 Second
Edition or above version.
1. Boot-up your computer into Windows 98SE, make sure the ‘IEEE 1394
Host Controller’ device driver has installed and available in Win98SE.
Please right-click ‘My Computer’, click ‘Properties’ ‘Device
Manager’ to open the ‘Device Manager’ window, refer to the below
picture to check whether the ‘IEEE 1394 Host Controller’ is installed.
2. Microsoft has provided the ‘1394 Storage Supplement’ on ‘Windows
Update web site’, this patch file can let IEEE1394 devices be removed
safely, please go to ‘Windows Update’ to download this patch file,
otherwise, the IEEE 1394 device won’t work stable.
3. To download the patch file, please click Start ‘Windows Update’ to
link to the web site.
4. On the web site, click ‘Product Updates’ to open the download list,
under the ‘Recommended Updates’ area, check ‘Windows 98 Second
Edition 1394 Storage Supplement’, then click ‘Download’ button to
download the patch and install it.
5. After the update is complete, restart computer.
6. Connect the AC adapter plugs into the DC IN Jack at the rear panel of
the CD-RW, attach the AC adapter to the AC power outlet. Plug the port
connector of the IEEE 1394 cable into the IEEE 1394 port of computer.