EXP Computer IEEE 1394 Firewire CD-RW Station - Manual (Page 10)

- 10 -
USING CD USING CD USING CD USING CD----RW WITH IEE RW WITH IEE RW WITH IEE RW WITH IEEE 1394 INTERFACE E 1394 INTERFACE E 1394 INTERFACE E 1394 INTERFACE
Connect the IEEE 1394 CD-RW to computer
♦ Windows 98SE/Me/2000 and Macintosh:
1. Connect the 36-pins connector to the interface connector of the CD-RW.
2. Plug the AC adapter into the DC IN Jack of CD-RW, and attach the AC
adapter to the AC power outlet.
3. Plug the port connector of IEEE 1394 cable into the IEEE 1394 port of
computer, the Portable CD-RW is ready for use immediately.
Disconnect the IEEE 1394 CD-RW from computer
♦ Windows 98SE:
Note: If you didn’t download and install the ‘1394 Storage
Supplement’ from ‘Windows Update’ web site, plug out the
1394 cable directly during Windows 98SE running may causes
the Windows 98SE halted. If you experienced this situation, the
best solution is install the above patch file, please follow the
procedure in ‘Software Installation for Windows 98SE’ to
complete the update.
1. Double-click on the icon in system tray, the ‘Unplug or Eject
Hardware’ dialog box appears.
2. Highlight the ‘1394/USB CD-ROM’ in the dialog box, click on Stop,
then click on OK on next screen.
3. Wait for few seconds, the system prompts ‘The 1394/USB CD-ROM
can now be safely removed from the system’, click on OK, and then plug
out the IEEE 1394 cable from the IEEE 1394 port of computer.