Software installation for windows me – EXP Computer CRW with CDROM Card User Manual
Page 17

- 11 -
SOFTWARE INSTALLATION FOR WINDOWS Me
Windows Me will install the external CD-RW with its resident driver, please do not insert the device
driver diskette into floppy drive during the installation.
1. Boot-up your computer into Windows Me, making
sure the device driver for ‘PCMCIA Socket’ has been
installed and is available. To check this, right-click
‘My Computer’, click ‘Properties’ and then ‘Device
Manager’ to open the ‘Device Manager’ window.
Refer to the figure shown alongside to see if the
PCMCIA Controller is installed without error.
2. Ensure the PCMCIA interface cable and then the AC adapter connections are made as described in
Hardware Installation. Slowly insert the PC Card of interface cable into the PCMCIA socket of
computer and press firmly until the connector is seated (Please note that the PC Card is keyed to
guide for proper insertion).
3. If this is the very first time you are connecting the
drive to computer, the ‘Add New Hardware
Wizard’ dialog box appears as shown. Select
‘Automatic search for a better driver
(Recommended), do not insert the device driver
diskette, click Next to continue.