EXP Computer Data Traveler 336E User Manual
Page 10

3. Select “Driver from disk provided by hardware manufacturer”, and insert the device
driver diskette, Windows 95 will try to locate the modem’s driver from the floppy
drive automatically. Select the EXP 33600 Fax-Data PCMCIA Modem. The system
will beep when the finishing installation procedures.
IF SOMETHING GOES WRONG
After you inserted the card and there is no “New Hardware Found” window
prompt or there is no information about the modem. Then, please check the PCMCIA
Socket support. The 32-Bit Card support may not be enabled or working properly.
Then, follow the instructions for enabling the Socket support.
CHECKING YOUR MODEM INSTALLATION
After installation, you may wish to check if the computer recognized the
modem and the assigned COM port.
Click on Start => Settings => Control Panel => Modem => Diagnostics tab.
Locate the modem’ s COM port then highlight it. Click on ‘More Info... button.
Windows 95 will try to communicate with the modem. The More Info... window
appears with all the modem identification information.
The modem is installed properly and ready to use. If you have a program that requires a
modem, please check your COM port setting. Match the COM port and the IRQ
(Interrupt Request) setting for the modem in the ‘More Info.. window.