EXP Computer CDG-821 - Manual (Page 26)

- - 21
TROUBLE SHOOTING
Windows 95
The Windows 95 32-bit mode plug-n-play drivers will automatically
allocate the hardware resources for CD Traveler, therefore, you do not
need to choose the I/Os during the installation. However, if the system is
not working properly you still can select the I/Os by proper procedures.
Be sure you have the card inserted before doing the configuration
change.
1. Go to “Control Panel”
2. Double click at “System” icon
3. Select “Device Manager”
4. If you are using CD-ROM + Game, click at “Multi-function adapters”
and highlight “Portable CD-ROM + Game”
5. If you are using CD-ROM only, click “Hard disk controller” and
highlight “Portable CD-ROM”
6. Double click at the device you choose and select the “Resource” at
the pop-up windows, uncheck the “use automatic settings”
7. You can change the I/Os or IRQs by clicking at them
8. Make sure the “Conflicting device list” shows “No conflicts”.