EXP Computer CDG-821 - Manual (Page 14)

- - 9
INSTALL CD-ROM WITH THE GAME ADAPTER
1. Connect the game adapter to CD-ROM drive, and tighten the two
screws on the game adapter.
2. Connect the joystick or game-pad to game port
3. Connect the PCMCIA interface card to the Game Adapter, and
tighten the two screws on the cable connector.
4. Place the CD-ROM drive in the horizontal position. The CD-ROM is
designed to operate only in the horizontal position. Operating the CD-
ROM drive in any abnormal position is not recommended.
5. Locate the PCMCIA slot of your computer or consult your computer
user’s manual for its location.
6. Align the PCMCIA interface card with the arrow sign pointing toward
the computer’s slot. (Please note that the card is keyed to guide for
proper insertion.)
7. Slowly insert the PCMCIA interface card into the slot and press firmly
until the connector is seated.
8. Turn the system ON to install the CD TRAVELER device driver.
Please follow the Software Installation procedures.