EXP Computer CDG-821 - Manual (Page 17)

- - 12
Follow the on-screen instruction to continue. After finishing, remember
to shutdown Windows and restart your computer if you are using the CD
TRAVELER to install Windows 95.
JOYSTICK CALIBRATION
After the installation procedure has been completed, please check to
see if the Game Port is functioning correctly by performing the following
steps.
1) Select Control Panel from My Computer.
2) Select Joystick.
3) Click on “Calibrate...” and then “Test...”.
4) Follow the on-screen instructions to finish the joystick calibration.
If the PCMCIA Game card is not connected properly to the PCMCIA
socket, clicking on the Joystick icon will cause nothing to happen.
On the other hand, if the PCMCIA Game card is not connected properly
to the joystick, “Calibrate...” and “Test...” will not be displayed, and you
will not be able to calibrate the joystick at all.