EXP Computer CDG-821 User Manual

Page 25

- -

HOW TO PLAY THE AUDIO CD

Windows 3.1

The CD-Audio CDs can be played on your PCMCIA CD-ROM by using CD
Audio software utilities, such as the Media Player in Windows 3.1. To use
Media Player, you must have the [MCI] CD Audio driver installed. Make sure
the CD-Audio disc is installed in the CD-ROM drive. The CD Audio driver is
installed through the Control Panel. Go into the Drivers and ADD [MCI] CD
Audio. The installation will require one of the Windows diskettes to install the
driver.

The driver file name is MCICDA.DRV. This should be in the System
directory.
The system.ini should then have the driver listed in the section

[mci]
CDAudio=mcicda.drv

The mplayer.ini should have:

[Options]
CDAudio=62

[Devices]
CDAudio=2553, CD Audio

Windows 95

Click on “Start” button then choose”Programs”, then “Accessories”, then
“Multimedia” then click on the CD Player Icon.
If you do not have the Accessories Group or Multimedia Group, the options
may have not installed during Windows 95 set up. Click the Start button, go to
Setting => Control Panel click on Add/Remove Programs then Windows Setup
Tab. Place a check mark on the box for missing programs and Windows 95
setup will install the CD Player for you.