EXP Computer Bluetooth: iPAQ H3870 - Manual (Page 4)

Examine the Status column under the Bluetooth Serial Port service. Notice that the service is
started and that COM4 will be the Virtual COM (VCOMM) port that will be assigned to an
incoming SPP connection.
Once you have connected to the Bluetooth Serial Port service using iPAQ, this display will
change to the following:
Once again, examine the Status column under the Bluetooth Serial Port service. Notice that the
service is started and the COM4 is assigned to the Bluetooth connection. Also notice that the
friendly name and Bluetooth Device Address of the BTW unit is displayed for this connection.
From the above example, you can see that COM4 is the appropriate port to use on the BTW side
of the connection. You must set ActiveSync to use this com port in order to communicate with
your iPAQ.
3.6 C ONFIGURING A CTIVE S YNC 3.5
To configure ActiveSync, you must access the Connection Settings dialog as shown below.