beautypg.com

Emtek Modern Keypad Leverset Locksets (Adjustable Latch) User Manual

Page 4

background image

4

Use a Phillips head screwdriver to remove screws (item #4c) shown below and

detach Inside Trim Plate from the Inside Chassis.

Fasten Adjustable Latch using two #8 x 3/4” Wood Screws (item #6).

2. Remove Screws from Inside Trim Plate

How to Install

!

!

REMOVE INSIDE

CHASSIS FROM

TRIM PLATE BEFORE

INSTALLING THE

OUTSIDE TRIM.

THUMBTURN MUST

BE IN NEUTRAL

POSITION.

To remove Pin:

Push Plastic Latch Pin (item #9)

through latch with screwdriver.

The Adjustable Latch is factory

shipped with a 23/4” backset

position. Remove pin and slide

spindle hub forward for a 23/8”

backset, then reinsert the pin in

the hole at the back of the latch

as shown.

1. Install Adjustable Latch

LH

RH

See Page 3 for Handing

Information.

Plastic Latch Pin

Plastic

Latch

Pin

Scan QR code for

installation video